Press ##2773 and press END. Scroll down and select DEBUG. The signal strength is the 4th line down (for example, Rx-96)

When phone turns on, as soon as green light shuts off, press FCN (right arrow) 00. It will ask for FSC CODE. Enter 000000 (6 zeros) and press OK. Highlight DEBUG SCREEN and press FCN, FCN. Signal strength is the top right number.
On 2nd line, if the letter is upper case (for example, “A”), then the phone is on the 1900 MHz band. If lower case (for example, “a”) it is on 800 MHz. To exit test mode, turn off phone.

Power the phone off and then back on again. Quickly Press MENU, 7, *, *. FSC Code is 000000. Press SELECT Key (middle button). Select DEBUG SCREEN. Select NORMAL. Signal strength is on the second line after RX. You may have to dial a fake phone number (for example, 555-5555) to get the Rx level to update. Press POWER OFF to exit.

From the main menu highlight and select OPTIONS and then select STATUS from the next menu. The top line is the signal strength (i.e. -78 dBm). Note: GSM and iDEN models also have this feature.

Click on START. Select SETTINGS from the drop-down screen. Select SYSTEM tab at the bottom of the screen. Scroll down to SELF TEST and select. Unmark all option boxes except GSM/GPRS and click START. When the phone displays GPRS CONNECT NOW? select NO. The 8th line down displays signal strength.
Click REFRESH to update signal.

Enter *#*#364#*#* and your phone will enter test mode. Signal strength follows RSSI. This test mode does not show –dB. Strong signal is 31 (approx -50 dBm), weak signal is 4 (approx -105 dBm), so the higher the number, the better the signal. Press END or Done to exit.

Enter *#*#364#*#* and your phone will enter test mode. Signal strength follows RSSI. This test mode does not show –dB. Strong signal is 31 (approx -50 dBm), weak signal is 4 (approx -105 dBm), so the higher the number, the better the signal. Press END or Done to exit.

Run application FieldTrial.exe located in WINDOWS folder.

Press 111111 (six ones). Select OPTIONS. Scroll to SERVICE and press OK. Scroll down to DEBUG and press OK, Enter 000000 and scroll to DEBUG SCREEN. Press OK(*), select ON and press OK. Press NEXT. The signal strength is on the 2nd line (for example, Rx: -87). To exit, press END and follow beginning instructions to * and select OFF.

Press MENU, 0. Enter Service Code, 000000 (six zeros). Scroll to FIELD TEST. Press SELECT. Scroll to SERVICE or SCREEN. Press SELECT. Signal strength is on the line that says RX Level. On Some newer phones you will want to make a phone call while in the test mode to get the numbers to update. To exit test mode push CLEAR, END or simply turn off the phone. (Note: On some models you will need to take the battery off and put it back on again.)

Press ##33284# or ##33284, then press the blue OK button. If asked for a password, it is usually 040793 or 000000.
Choose DEBUG SCREEN. Signal strength is after RxPower. Please Note: Certain newer phones have a special service code that you must get from Sprint. Press CLR to exit Test Mode or power off.

Enter 2945#*#. Choose “Eng Mode” (Option 4) Press OK. Then choose “Cell Environ” (Option 1) Press OK. The Cell Environ screen will appear with some information about your tower. Signal strength for the tower you are using is on the top left line and is displayed in 2 digit format that is not dBm (the higher the number the better). The lines below are neighboring towers. The channel number which shows frequency (i.e.G598) is also displayed on the same line. Press END to Exit.

Press ## 77647268350, then press SEND (##PROGRAM8350 SEND).
Service Code: 000000 (six zeros). Scroll to FIELD TEST. Press
SELECT. Scroll to SCREEN. Press SELECT. Signal strength is on the
line that says RX Level. On Some newer phones you will want to make
a phone call while in the test mode to get the numbers to update. To
exit test mode push CLEAR, END or simply turn off the phone. (Note:
On some models you will need to take the battery off and put it back on
again.)

Press ##33284. Select SAVE and press OK. Select SERVICE
SCREEN and press OK. The signal strength is on the 9th line down (for
example, Rx power: -XX). To exit press END.

Press ##77647269900 SEND. Enter Service Code, 000000 (six zeros). Scroll to
FIELD TEST. Press SELECT. Scroll to SERVICE or SCREEN. Press SELECT.
Signal strength is on the line that says RX Level. On Some newer phones you
will want to make a phone call while in the test mode to get the numbers to
update. To exit test mode push CLEAR, END or simply turn off the phone. (Note:
On some models you will need to take the battery off and put it back on again.)

Press ##77647268700, then press SEND (##PROGRAM8700 SEND).
Service Code, 000000 (six zeros). Scroll to FIELD TEST. Press
SELECT. Scroll to SERVICE or SCREEN. Press SELECT. Signal
strength is on the line that says RX Level. On Some newer phones you
will want to make a phone call while in the test mode to get the
numbers to update. To exit test mode push CLEAR, END or simply
turn off the phone. (Note: On some models you will need to take the
battery off and put it back on again.)

Press Menu 0. Enter Service Code: 000000 (six zeros). Scroll to
FIELD TEST. Press SELECT. Scroll to SERVICE or SCREEN. Press
SELECT. Signal strength is on the line that says RX Level. On some
newer phones you need to make a phone call while in test mode to get
the numbers to update. To exit test mode press CLEAR, END or turn
the phone off and on. (Note: On some models you will need to take the
battery off and put it back on again.)

Enter ##33284#. Select Service Screen from Debug menu. Signal is
after Rx power. Press CLR to exit or power off.
Note: The Fusic has a special service code that you must get from
Sprint.

Press FCN00** very quickly. Continue to press 83786633 and the
STO button. The phone should display US. (If not, the FCN00**
wasn’t done fast enough). Press 45# to display the signal strength.
This number is not actually a dB reading, but is referencing the dB
strength. 45# should be pressed every time you wish to see the
updated signal reading. The signal strength is between 65 and 150.
Signal is the best at 150. To exit test mode, press 01#.

Enter ##*, then press SEND. Highlight CALL STATUS SCREEN and press Ok. Signal strength is the first number on the 3rd line down. Note: this screen also shows EVDO data readings. Press OK and then EXIT to exit.

Press CLR 073887* very quickly. Security Code 000000. Highlight
"Test Mode" and press OK. Highlight "Enabled" and press OK. The
phone will return to the menu. Power the phone off and on again.
Phone will show signal strength on the second line down, last number
(Example 67-061B. -061 is the signal strength). To toggle in and out:
Press # and then the upper left key with the dot on it. To Exit: Follow
above instructions and choose "Disabled."

Follow the process for V60 phones. Turn off phone off, then back on.
Press MENU and the button left of the MENU button in quick
succession. The signal strength is the 3rd number down on the left
side.

Quickly dial # , * , Menu, RIGHT ARROW. Scroll down to System
Status or RX Status, press “View.” NOTE: On some phones you will
push TRACE or MENU so the signal will automatically update. Other
phones you will have to press BACK to return to the Menu and then
choose RX Status again to manually update. Turn the phone off to
exit.

On the RX STATUS Screen the top decimal number is your Signal
Quality Equivalent (SQE). This number needs to be as high as
possible between 25.00 to 35.00. Your signal strength is the second
number on the second or third line down. An example would be -00dB
-90 where -90 is your signal strength.

Follow the standard #, *, MENU, RIGHT ARROW. Select RX STATUS.
This phone does not automatically update so you will need to back out
to the menu and go back into RX STATUS to update the screen.
Quickly dial #, *, MENU, RIGHT ARROW. Scroll right 6 times to find
signal strength screen. Press TRACE to update.

Press Menu (OK), 0. Service Code 000000. Press OK. Choose
DEBUG SCREEN. Press OK. Signal Strength is after RX= or RSSI=.
This screen also shows EVDO RSSI. To exit, power phone off.

Press ##2773 then press END. Enter 000000 (six zeroes) for the User
Lock Code. Signal strength follows RX Level or RX Power. Press END
to exit.

Press *3001#12345#. Scroll up 1 to FIELD TEST (some phones may
say NET MONITOR instead of FIELD TEST) and SELECT. Scroll to
ENABLED and press OK. Turn phone off and then back on. Signal
strength is the upper or lower left number. After test mode is enabled it
will stay in your regular menu. To easily get in or out, press MENU, up
1 FIELD TEST and SELECT or OK. Dial 00 to get out and 01 to get

On the Sprint Software: Click Menu, Click Device Info & Diagnostics, Signal strength is on the line that says “Communication Mode” or “Signal Strength.”

Press #7764726#. Press SEND. Scroll down to where it says NAM 1
and press OK. Scroll to ENTER LEVEL 4. Press YES. Scroll to
BUILT IN MONITOR. Press EDIT, CLEAR, 1, OK. Press BACK,
BACK TO LEVEL 1, YES, EXIT, SAVE CHANGES, YES. Signal
strength is the top right number. To get out of test mode, follow the
same sequence: EDIT, CLEAR, 0, OK.

Press ##27732726, press END key. Scroll down and select DEBUG.
The signal strength is the 4th line down. (For example Rx-96)

Press MENU, choose “Phone Settings” and press #. User Lock Code:
000000 (six zeros). Choose Field Test Mode and then DEBUG. Signal
strength is on the line that says: T-XX DXXX. To exit, turn off phone.

Enter ##33284 and press OK. Select DEBUG SCREEN and press
OK. Signal strength is 2nd number on 2nd line (for example, T-XX Do
XX-05). To exit, turn off phone.

Option 1: On the main screen press *#0011# and an information screen will
appear.
Option 2: In the Windows folder open the folder called “Test Mode” and
run the file by the same name. Signal strength will follow RSSI. This
screen will also show the frequency which you are operating on.
Simply select EXIT to get out of this screen.

Enter *#9324#. Signal strength is last number on the 4th line. The
number omits the negative. To exit, turn off phone.

Press MENU, 0, *. Then enter code 000000 (six zeros). Choose
DEBUG, 4th line, last number.

Press MENU, 9, *. Enter Field Service Code, 000000 (six zeroes).
Select DEBUG SCREEN. Signal strengthis on the line that says T-63
D089 (for example, D089 is -89dBm). To exit, turn power off.

Enter ##33284#. The phone asks for a 6 digit security code which you
will need to get from Sprint. After entering it the phone will go into the
test mode screen. Your signal strength is on the line that says TxxD0xx.
To exit, turn off phone.

Press MENU, 7, *. Enter Service Code: 000000 (six zeros). Select
DEBUG SCREEN. Signal strength is on the 1st line. To exit, turn off
phone.

Enter ## 33284#, press OK. Enter security code 040793. Select
DEBUG SCREEN and press OK. Signal strength is 2nd number on 2nd
line (for example, T-XX Do XX -05). To exit, turn off phone.

Press MENU (blue center button). Scroll to SETTINGS & TOOLS
(tools icon) then press the # key. Enter User Lock Code, 000000 (six
zeroes). Select DEBUG SCREEN. The screen will read some similar to
T-63 D089. The number after the D is the signal strength, for example -
89dBm. To exit, turn power off

##33284 OK

Press ##040793, MENU and then select SCREEN. You may havt to
press the up arrow to keep from flashing in and out. (With 7300 you
may need to make a call to keep from flashing in and out. Any fake
number works fine).

Scroll down to DISPLAY and press OK. Press 0 (zero). Will ask for
Service Code – enter 040793. Select SCREEN and press OK. Signal
strength is the negative number at the bottom (for example (-97). To
exit test mode, turn off phone.

Press MENU, select MONITOR, RSSI, -XX. Test mode also tells
frequency. To exit, press the power button as the back button. To
force TDMA, press MENU. Scroll to NETWORK. Scroll to USER
SETTING. Scroll to TDMA ONLY and press OK.